COP/ SD/ DHD/ IR/ Mission/ QL/ BR/ CIR etc.
Jinquan
82071990
Jinquan corporation can design and manufacture varieties of DTH bits according to customer's requirements of the bit dia\air hole nos.\carbide button shape and the face shape. High air pressure and low air pressure DTH drill bits are both available.
Our DTH button hammer bits are made from the best tungsten carbide tips & special steels, after hot heat treated, the steels reach a good level in surface compression & fatigue resistance. All of our products are compatible with many products manufactured by Sandvik, Atlas Copco, Mincon etc., all our Down the hole bits are widely used in mining, tunneling, quarrying, construction, and civil engineering projects.
Normally we produce three type of bit face designs: Flat face, Convex face, Concave face. Of course, if you have any special requirement, we could produce as per your instruction completely.
Down-The-Hole Drilling DTH Button Bits:
1.manufacture as your requirement
2.bit diameter, face shape
3.carbide button shape
4.number of air holes
Jinquan corporation can design and manufacture varieties of DTH bits according to customer's requirements of the bit dia\air hole nos.\carbide button shape and the face shape. High air pressure and low air pressure DTH drill bits are both available.
Our DTH button hammer bits are made from the best tungsten carbide tips & special steels, after hot heat treated, the steels reach a good level in surface compression & fatigue resistance. All of our products are compatible with many products manufactured by Sandvik, Atlas Copco, Mincon etc., all our Down the hole bits are widely used in mining, tunneling, quarrying, construction, and civil engineering projects.
Normally we produce three type of bit face designs: Flat face, Convex face, Concave face. Of course, if you have any special requirement, we could produce as per your instruction completely.
Down-The-Hole Drilling DTH Button Bits:
1.manufacture as your requirement
2.bit diameter, face shape
3.carbide button shape
4.number of air holes
DTH Hammers | DTH Bit Dia. (mm) | Shank |
JQL100 | 64 - 76 | BR1 |
JQ200 | 70 - 90 | BR2 |
JQ300 series | 85 - 110 | BR3, Cop32, Cop34, MACH33, DHD3.5 etc. |
JQ400 series | 105 - 145 | Cop44, SD4, TD40, MACH44, DHD340A etc. |
JQ500 series | 127 - 180 | Cop54, SD5, QL50, M50, DHD350 etc. |
JQ600 series | 152 - 216 | Cop64, SD6, QL60, M60, DHD360 etc. |
JQ800 series | 190 - 295 | Cop84, SD8, QL80, M80, DHD380 etc. |
JQ100 series | 251 - 394 | SD10, NUMA100 |
JQ120 series | 305 - 460 | SD12, NUMA120, QL120, DHD120, NUMA125 |
JQ150 | 448 - 762 | SD15 |
JQ180 series | 457 - 762 | NUMA180 |
JQ240 | 610 - 864 | NUNA240 |
JQ330 | 838 - 1092 | NUMA330 |
JQ13A | 350 - 660 | DB13 |
JQ19A | 508 - 760 | DB19 |
JQ21A | 610 - 800 | DB21 |
DTH Hammers | DTH Bit Dia. (mm) | Shank |
JQL100 | 64 - 76 | BR1 |
JQ200 | 70 - 90 | BR2 |
JQ300 series | 85 - 110 | BR3, Cop32, Cop34, MACH33, DHD3.5 etc. |
JQ400 series | 105 - 145 | Cop44, SD4, TD40, MACH44, DHD340A etc. |
JQ500 series | 127 - 180 | Cop54, SD5, QL50, M50, DHD350 etc. |
JQ600 series | 152 - 216 | Cop64, SD6, QL60, M60, DHD360 etc. |
JQ800 series | 190 - 295 | Cop84, SD8, QL80, M80, DHD380 etc. |
JQ100 series | 251 - 394 | SD10, NUMA100 |
JQ120 series | 305 - 460 | SD12, NUMA120, QL120, DHD120, NUMA125 |
JQ150 | 448 - 762 | SD15 |
JQ180 series | 457 - 762 | NUMA180 |
JQ240 | 610 - 864 | NUNA240 |
JQ330 | 838 - 1092 | NUMA330 |
JQ13A | 350 - 660 | DB13 |
JQ19A | 508 - 760 | DB19 |
JQ21A | 610 - 800 | DB21 |